1962 M37 Newbie Restore

Build and Restoration Threads Belong Here

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

User avatar
jrodjared
PFC
PFC
Posts: 78
Joined: Tue Jan 27, 2015 1:06 pm
Location: Baltimore, MD

Re: 1962 M37 Newbie Restore

Post by jrodjared »

Some minor work done this weekend, nothing crazy. Got the front passenger brake drum on. Should have only taken me 30 minutes, but it ended up taking hours because I broke a stud :evil:
Broken stud
Broken stud
IMG_0416.jpg (64.29 KiB) Viewed 4009 times
Weld a chisel to it? Nope
Weld a chisel to it? Nope
IMG_0417.jpg (91.03 KiB) Viewed 4009 times
I've done it now
I've done it now
IMG_0418.jpg (85.23 KiB) Viewed 4009 times
Without a plan there's no attack. No attack, no victory.
User avatar
jrodjared
PFC
PFC
Posts: 78
Joined: Tue Jan 27, 2015 1:06 pm
Location: Baltimore, MD

Re: 1962 M37 Newbie Restore

Post by jrodjared »

I ended up drilling it out and using a reverse drill bit to extract it. I had to keep stepping up because they just wouldn't grab. Luckily the last one worked! I didn't want to heat it up because she was all painted perty.
IMG_0419.jpg
IMG_0419.jpg (88.55 KiB) Viewed 4008 times
IMG_0420.jpg
IMG_0420.jpg (77.29 KiB) Viewed 4008 times
All ready for the engine
All ready for the engine
IMG_0422.jpg (134.03 KiB) Viewed 4008 times
Now that the front end is FINALLY together, I can move on to the engine.
Without a plan there's no attack. No attack, no victory.
Elwood
MSGT
MSGT
Posts: 937
Joined: Mon Oct 24, 2011 9:34 am
Location: Water Winter Wonderland

Re: 1962 M37 Newbie Restore

Post by Elwood »

Looking good.

As frustrating as that broken stud was, probably best it broke in the shop and not out in the woods somewhere.

Is that a Snap-On stud remover set in the red box? 8)
“When a long train of abuses and usurpations, pursuing invariably the same Object evinces a design to reduce them under absolute Despotism, IT IS THEIR RIGHT, IT IS THEIR DUTY, TO THROW OFF SUCH GOVERNMENT...” -Declaration of Independence, 1776
User avatar
jrodjared
PFC
PFC
Posts: 78
Joined: Tue Jan 27, 2015 1:06 pm
Location: Baltimore, MD

Re: 1962 M37 Newbie Restore

Post by jrodjared »

@Elwood yup that's the Snap-On stud remover. It was stupid expensive, something like $250 but worth every penny when you are trying to save and reuse parts on these old truck.
Without a plan there's no attack. No attack, no victory.
Elwood
MSGT
MSGT
Posts: 937
Joined: Mon Oct 24, 2011 9:34 am
Location: Water Winter Wonderland

Re: 1962 M37 Newbie Restore

Post by Elwood »

I thought it looked familiar. The set in my toolbox has gotten a good workout on my M37. :)
“When a long train of abuses and usurpations, pursuing invariably the same Object evinces a design to reduce them under absolute Despotism, IT IS THEIR RIGHT, IT IS THEIR DUTY, TO THROW OFF SUCH GOVERNMENT...” -Declaration of Independence, 1776
T. Highway
Moderator
Moderator
Posts: 1791
Joined: Thu Jul 09, 2009 4:57 am
Location: S.E. Wisconsin, USA, Earth

Re: 1962 M37 Newbie Restore

Post by T. Highway »

It is usually the simple looking tasks that turn into a several hour project when one small problem happens. Glad to see you had the correct tools to finish up the RR of the stud.

Bert
1952 M37 W/W Rebuild @ 59% complete
Engine rebuild @ 95% complete
1985 M1009, 1990 M101A2, 2008 M116A3 Pioneer tool trailer
MVPA # 24265
NRA Life Member
NRA Cert. Personal Protection Pistol Instructor
NRA Cert. RSO
Class III RSO/KCR
User avatar
jrodjared
PFC
PFC
Posts: 78
Joined: Tue Jan 27, 2015 1:06 pm
Location: Baltimore, MD

Re: 1962 M37 Newbie Restore

Post by jrodjared »

Been a while since my last post so I thought I would share an update. Been busy the past few weeks for sure. Decided to tackle the donor:
IMG_0535.JPG
IMG_0535.JPG (164.77 KiB) Viewed 3931 times
It was in a precarious spot so I had to use a lot of straps and come-alongs to help persuade the cherry picker in the direction I needed. They also acted as kind of a safety because that engine is heavy and there were certainly a few close calls!
IMG_0537.JPG
IMG_0537.JPG (174.02 KiB) Viewed 3931 times
Out she comes.
IMG_0539.JPG
IMG_0539.JPG (144.74 KiB) Viewed 3931 times
Without a plan there's no attack. No attack, no victory.
User avatar
jrodjared
PFC
PFC
Posts: 78
Joined: Tue Jan 27, 2015 1:06 pm
Location: Baltimore, MD

Re: 1962 M37 Newbie Restore

Post by jrodjared »

And then came the rain.
IMG_0540.JPG
IMG_0540.JPG (151.76 KiB) Viewed 3931 times
Back at it. Notice the angle of the stand :shock: I had it strapped to my van for safety, and I surely needed it!
IMG_0541.JPG
IMG_0541.JPG (132.66 KiB) Viewed 3931 times
My prize has been claimed.
IMG_0543.JPG
IMG_0543.JPG (111.89 KiB) Viewed 3931 times
Without a plan there's no attack. No attack, no victory.
User avatar
jrodjared
PFC
PFC
Posts: 78
Joined: Tue Jan 27, 2015 1:06 pm
Location: Baltimore, MD

Re: 1962 M37 Newbie Restore

Post by jrodjared »

The lights on my van came in handy that night 8)
IMG_0544.JPG
IMG_0544.JPG (79.31 KiB) Viewed 3929 times
A week went by and ready for more. Before tearing in to the engine I brought the tub out to get blasted:
IMG_0551.JPG
IMG_0551.JPG (128.32 KiB) Viewed 3929 times
In the blast room:
IMG_0553.JPG
IMG_0553.JPG (88.46 KiB) Viewed 3929 times
I'll post some after pics when I pick it up.
Without a plan there's no attack. No attack, no victory.
User avatar
jrodjared
PFC
PFC
Posts: 78
Joined: Tue Jan 27, 2015 1:06 pm
Location: Baltimore, MD

Re: 1962 M37 Newbie Restore

Post by jrodjared »

Today I started the engine teardown. First separated the transmission from the bellhousing.
IMG_0557.JPG
IMG_0557.JPG (150.02 KiB) Viewed 3929 times
Bellhousing off, now the flywheel:
IMG_0559.JPG
IMG_0559.JPG (145.98 KiB) Viewed 3929 times
And then all the accessories, down the short block. This is my dad, the original owner of the truck.
IMG_0562.JPG
IMG_0562.JPG (133.1 KiB) Viewed 3929 times
Without a plan there's no attack. No attack, no victory.
User avatar
jrodjared
PFC
PFC
Posts: 78
Joined: Tue Jan 27, 2015 1:06 pm
Location: Baltimore, MD

Re: 1962 M37 Newbie Restore

Post by jrodjared »

I went for the selfie too. Figure I don't appear much in these photos!
IMG_0564.JPG
IMG_0564.JPG (121.13 KiB) Viewed 3928 times
OK enough of that. Got the engine on its stand then pulled the head. It looked pretty rusty and nasty in there :(
IMG_0568.JPG
IMG_0568.JPG (131.1 KiB) Viewed 3928 times
There was a bit of water because the engine got rained on while it was out for a few days. I know I should have covered it, but I didn't. Hopefully it doesn't mean anything. I'm planning on rebuilding it anyway,

Pulled the oil pan to see what the bottom looked like. Pretty clean, no obvious damage that I can see yet.
IMG_0569.JPG
IMG_0569.JPG (134.35 KiB) Viewed 3928 times
Tomorrow I am going to try to tear in to the crank, pull the timing cover, etc. Break it down to the block so I can bring it to a machine shop. I've got a lot of reading and research to do at this point. This is all uncharted territory for me, not that I have had any idea what I am doing up until this point! All I can do is take some pics and learn from my mistakes. Worst it could do is not run, right? How's that any different than where I am now? hehe.
Without a plan there's no attack. No attack, no victory.
52 M-42
SFC
SFC
Posts: 741
Joined: Fri Feb 03, 2012 12:56 pm

Re: 1962 M37 Newbie Restore

Post by 52 M-42 »

Ah yes, working in the dark and the rain! How else would you possibly do it? You surely wouldn't want to waste a nice sunny day doing a job like that (unless you had a heated, lighted, cement floored garage). I loved your jerry rigged, Rube Goldberg extraction machinery too (reminded me of some of my early adventures).

It looks like you you are off to a very good, traditional start to your restoration adventure.

Good Luck on your project and keep the pictures coming!
User avatar
jrodjared
PFC
PFC
Posts: 78
Joined: Tue Jan 27, 2015 1:06 pm
Location: Baltimore, MD

Re: 1962 M37 Newbie Restore

Post by jrodjared »

Thanks 52 M-42!
Without a plan there's no attack. No attack, no victory.
F18hornetm
SGT
SGT
Posts: 248
Joined: Wed Sep 17, 2014 3:07 am
Location: Eastern Shore, Maryland

Re: 1962 M37 Newbie Restore

Post by F18hornetm »

Just read all your posts and realized your in Baltimore. great progress on your restoration. Really coming along nice. When you get it done, drive down to the good part of Maryland [or the out house side of Maryland as one governor called it]and I'll buy ya a beer and a crab cake!! :D :D

side note: Not sure you remember, but that comment from a former governor caused him to have a whole bunch of tractors and manure spreaders show up around the capital!!!
User avatar
jrodjared
PFC
PFC
Posts: 78
Joined: Tue Jan 27, 2015 1:06 pm
Location: Baltimore, MD

Re: 1962 M37 Newbie Restore

Post by jrodjared »

F18hornetm are you going to go to the Tuckahoe Steam and Gas show in July? That's out your way no? I'll be out there, let me know if you make it.

Back at it in the garage today. Found out why I wasn't able to crank it over:
IMG_0571.JPG
IMG_0571.JPG (151.13 KiB) Viewed 3886 times
I'm guessing my head gasket must have been bad or something and some water got in there. They were all kind of nasty but this one was particularly bad. All the pistons came out with a little persuasion, but not this one!

So we went with the BFH
IMG_0577.JPG
IMG_0577.JPG (135.45 KiB) Viewed 3886 times
Finally she came out, but I don't think I will be reusing these pistons.
IMG_0580.JPG
IMG_0580.JPG (124.43 KiB) Viewed 3886 times
At first I was trying to keep stuff as organized and labeled as I could, but at this point I just kind of gave up because it looked like nothing was serviceable.
Without a plan there's no attack. No attack, no victory.
Post Reply